12 Using the Baby Monitor
3. Using the Baby Monitor
Please read these instructions carefully, and be aware that this baby monitor is
only intended as an aid. It is not a substitute for responsible adult supervision.
3.1 Setting Up
• Make sure that the Baby Unit and Parent Unit are both switched on.
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
Do not place the Baby Unit within reach of a child or baby! If there is
interference with the picture or sound, try moving the units to different locations,
and ensure that they are not close to any other electrical equipment.
If you place the Parent Unit and Baby Unit too close together, you may hear a
high pitched noise. This is not a fault. The units are designed to be operated at
some distance apart. So move the units further apart.
3.2 Power On or Off the Baby Unit
Slide the ON/OFF switch 0 to the ON position to switch on the Baby Unit.
The power indicator lights up in blue.
Slide the ON/OFF switch 0 to the OFF position to switch off the Baby Unit.
The power indicator goes off.
3.3 Power On or Off the Parent Unit
Press and hold the power button 0 to switch on the Parent Unit. The power
indicator lights up in green.
Press and hold the power button 0 to switch off the Parent Unit. The power
indicator goes off.