Loading...
Getting Started
14
English
GETTING STARTED
ADJUSTING THE VOLUME
SELECTING A RADIO CHANNEL
Your radio offers either 4 or 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
SENDING A CALL
RECEIVING A CALL
1Hold down the Volume Set or Monitor but-
ton (see page 6); you will hear a continuous
tone.
2Turn the On/Off/Volume Control knob to the
desired volume level.
3Release the Volume Set or Monitor button.
1Turn your radio on.
2Use the Channel Selector knob to select the
desired channel.
3Hold the radio in a vertical
position, press the PTT button,
and talk at a distance of about
1 to 2 inches (2.5 to 5 cm)
from the microphone.
4Release the PTT button to listen.
1Turn your radio on.
2Adjust the radio’s volume (see page 14).
3Switch to the desired channel.
4If at any time a call comes through, you will
hear the call at the volume level you have set.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com