DELETE A NUISANCE CHANNEL/
Note: Your dealer/programmer must preprogram a
button to access this feature (see page 24).
If a channel or talkgroup continually generates
unwanted calls or noise (a “nuisance” channel/
talkgroup), you can temporarily remove it from
the scan list:
Restore Channels/Talkgroups to the Scan
1While the radio is on the nuisance channel/
talkgroup, press the preprogrammed
Nuisance Channel Delete button until you
hear a tone.
2Release the Nuisance Channel Delete
button. The nuisance channel/talkgroup is
Note: You cannot temporarily delete the
channel/talkgroup that has been
preprogrammed by your dealer/
programmer as your designated scan
channel/talkgroup, a priority channel/
talkgroup, or the last remaining
channel/talkgroup in the scan list.
1Power off the radio. Once the radio is powered
on again, the deleted nuisance channels/
talkgroups are restored to the scan list.
– or –
Press the preprogrammed Scan button to stop
2Press the preprogrammed Scan button again
to start scanning again. The deleted nuisance
channels/talkgroups are restored to the scan
– or –
Select a channel/talkgroup that has not been
preprogrammed for scan by your dealer /
programmer to stop Scan. Once you return to
the original channel/talkgroup, the deleted
nuisance channels/talkgroups are restored to
the scan list.