SELECT AN LTR CHANNEL/
Your PR400 display radio can be programmed
with up to 10 LTR sites and a maximum of 100
talkgroups, in total, across one or more sites
(up to a total of 10 sites).
To select an LTR Channel/Talkgroup:
Note: Site/talkgroup settings are programmed
by your dealer.
SELECT A CONVENTIONAL RADIO
Your radio offers 64 conventional channels.
To select a channel, turn the Channel
Selector knob clockwise or counterclockwise
until you reach the desired channel.
RECEIVE A CONVENTIONAL OR
1Turn the Channel Selector knob to select
the appropriate LTR channel/talkgroup.
L or M to select the appropriate LTR
Press any of the programmable buttons to
access a preprogrammed talkgroup. Then use
either the Channel Selector knob or L
and M to select the appropriate LTR
Note: The third option is available only if
your radio has been programmed
with a specified LTR channel/
1Turn your radio on.
2Adjust the radio’s volume (see page 27).
3Turn the Channel Selector knob to select the
desired conventional channel or LTR
L or M to select the desired
conventional channel or LTR talkgroup.
• Make sure the PTT button is released.