returns to the screen you were on prior to initiating
6Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
7Do one of the following:
• Press the PTT button to talk and release it to
Note: The RSSI icon disappears during
To enter extra digits, if requested by the Phone
Call, press any keypad key to begin the input of
extra digits. The first line of the display shows
Extra Digits: . The second line of the
display shows a blinking cursor. Enter the extra
digits and press to proceed. The DTMF
tone sounds and the radio returns to the
If the call ends while you are entering the extra
digits requested by the Phone Call, your radio
returns to the screen you were on prior to
initiating the call.
• Press One Touch Access button.
Note: The DTMF tone sounds.
If the entry for the One Touch Access button
is empty, a negative indicator tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end
During channel access and access/deaccess code
or extra digits transmission, your radio responds to
On/Off/Volume Control Knob and Channel
Selector Knob only. A tone sounds for every
Press to end the call.
9If deaccess code was not preconfigured in the
Contacts list, the first line of the display shows De-
Access Code:. The second line of the display
shows a blinking cursor. Enter the deaccess code
and press to proceed.
The deaccess code cannot be more than 10
Advanced Features in Non-Connect Plus Mode