Starting and Stopping Scan
While scanning, the radio will only accept data (e.g.
text message, location, or PC data) if received on its
Selected Channel.
1Use the Channel Selector Knob to select a
channel programmed with a scan list.
to access the menu.
or to Scan and press to select.
or to Scan State and press to
or to required scan state and press
to select.
The display shows Scan On when Scan is
enabled. The LED blinks yellow and the scan
icon appears.
The display shows Scan Off if Scan is
disabled. The LED turns off and the scan icon
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group
where activity is detected. The radio stays on that
channel for a programmed time period known as
“hang time”.
1Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
2Press the PTT button during hang time.
The LED lights up solid green.
3Wait for one of the following tones to finish (if
enabled), and speak clearly into the microphone.
The Talk Permit Tone.
The PTT Sidetone.
4Release the PTT button to listen.
Advanced Features in Non-Connect Plus Mode
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com