Loading...
Making a Phone Call
1Press the programmed Manual Dial button to
enter into the Manual Dial screen.
2
or to Phone Contact and press to
select.
The display shows Number:.
3Use the keypad to enter a subscriber alias.
If the access code was not preconfigured in the
Contacts list, the display shows Access Code:.
Enter the access code and press the button
to proceed.
The LED lights up solid green. The Phone Call
icon appears in the top right corner. The first text
line shows the subscriber alias. The second text
line displays the call status.
If the call-setup is successful, the DTMF tone
sounds. You hear the dialing tone of the telephone
user. The first text line shows the subscriber alias.
The Phone Call icon remains in the top right
corner.
If the call-setup is unsuccessful, a tone sounds
and the display shows Phone Call Failed. Your
radio returns to the Access Code input screen. If
the access code was preconfigured in the
Contacts list, the radio returns to the screen you
were on prior to initiating the call.
4Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5Press the PTT button to talk and release it to
listen.
6To enter extra digits, if requested by the Phone
Call, do one of the following.
Press any keypad key to begin the input of the
extra digits. Enter the extra digits and press the
button to proceed. The DTMF tone
sounds and the radio returns to the previous
screen.
Press One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator
tone sounds.
Making and Receiving Calls in Non-Connect Plus Mode
62
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com