Loading...
When using the programmable button to toggle
the Beacon Off, your radio plays a tone that falls in
pitch and shows a brief confirmation message.
In order to hear the tones described above when
turning the Beacon On and Off, the MOTOTRBO
radio and Connect Plus Option Board must both be
enabled for keypad tones. If your radio has been
programmed so that the Beacon can be turned On
and Off via the menu, follow the procedure below.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Connect Plus and press to
select.
4
or to Beacon and press to select.
If Beacon is currently disabled, the Enable option
is shown.
If Beacon is currently enabled, the Disable option
is shown.
5
or to Enable or Disable and press
to select.
The radio shows a brief message to confirm that
Man Down Beacon was enabled (or disabled).
Resetting the Beacon
If your radio has been programmed with either the
Beacon Reset button, or the Beacon menu option, it
is possible to reset the Beacon. This stops the
Beacon Tone (and also the Visual Beacon) without
turning the Beacon feature Off. The procedure for
resetting the Beacon depends on how your radio is
programmed. If programmed with a Beacon Reset
button, use the button to Reset the Beacon. When
using the programmable button to reset the Man
Down Alarms, your radio shows a brief confirmation
message. If your radio has been programmed so that
the Beacon can be Reset via the menu, follow the
procedure below.
1
to access the menu.
Advanced Features in Connect Plus Mode
226
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com