Loading...
Initiating an Emergency Call
Note: If your radio is set to Silent, it does not display
any audio or visual indicators during Emergency
mode until you press the PTT button to initiate a voice
transmission.
If your radio is set to Silent with Voice, it does not
initially display any audio or visual indicators that the
radio is in Emergency mode. However, your radio
unmutes for the transmissions of radios responding to
your emergency. The emergency indicators only
appear once you press the PTT button to initiate a
voice transmission from your radio.
For both “Silent” and “Silent with Voice” operation, the
radio automatically exits silent operation after the
Emergency Call is finished.
1Press the programmed Emergency button.
2Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3Press the PTT button to initiate a voice
transmission on the Emergency group.
When you release the PTT button, the Emergency
call continues for the time allotted for the
Emergency Call Hang Time.
If you press the PTT button during this time, the
Emergency call continues.
Initiating an Emergency Call with Voice to Follow
Your radio must be programmed for this type of
operation.
When enabled for this operation, when you press the
programmed Emergency button, and when your
radio receives the time slot assignment, the
microphone is automatically activated without
pressing the PTT button. This activated microphone
state is also known as “hot mic”. The “hot mic” applies
to the first voice transmission from your radio during
the Emergency call. For subsequent transmissions in
the same Emergency call, you must press the PTT
button.
1Press the programmed Emergency button.
2Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
Advanced Features in Connect Plus Mode
220
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com