Loading...
The Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer for
the assigned operation of the Emergency button.
If the short press for the Emergency button is
assigned to turn on the Emergency mode, then the
long press for the Emergency button is assigned
to exit the Emergency mode.
If the long press for the Emergency button is
assigned to turn on the Emergency mode, then the
short press for the Emergency button is assigned
to exit the Emergency mode.
When your radio is selected to a Connect Plus zone,
it supports three Emergency modes:
Emergency Call – You must press the PTT button
to talk on the assigned emergency time slot.
Emergency Call with Voice to Follow – For the
first transmission on the assigned emergency time
slot, the microphone is automatically unmuted and
you may talk without pressing the PTT button. The
microphone stays “hot” in this fashion for a time
period programmed into the radio. For subsequent
transmissions in the same Emergency call, you
must press the PTT button.
Emergency Alert – An Emergency Alert is not a
voice call. It is an emergency notification that is
sent to radios that are configured to receive these
alerts. The radio sends an emergency alert via the
control channel of the currently registered site.
The Emergency Alert is received by radios in the
Connect Plus network that are programmed to
receive them (no matter which network site they
are registered to).
Only ONE of the Emergency Modes can be assigned
to the Emergency button per zone. In addition, each
Emergency mode has the following types:
Regular – Radio initiates an Emergency and
shows audio and/or visual indicators.
Silent – Radio initiates an Emergency without any
audio or visual indicators. The radio will suppress
all audio or visual indications of the Emergency
until you press the PTT button to start a voice
transmission.
Silent with Voice – The same as Silent operation,
except that the radio will also unmute for some
voice transmissions.
Receiving an Incoming Emergency
Your radio may be programmed to sound an alert
tone and also display information about the incoming
Emergency. If so programmed, upon receiving the
Advanced Features in Connect Plus Mode
217
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com