Loading...
so that Scan can be turned on or off via the menu,
follow the procedure described next.
1
to access the menu.
2
or to Scan and press to select.
3 or to Turn On or Turn Off and press
to select.
The display shows Scan On momentarily if
scan is disabled.
The display shows Scan Off momentarily if
scan is enabled.
Editing the Scan List
Note: If the scan list entry happens to be the radio’s
currently selected group, the radio listens for activity
on this group regardless of whether the list entry
currently shows a check mark or not. Whenever a
radio is not in a call, the radio listens for activity on its
Selected Group, Multigroup, the Site All Call, and its
Default Emergency Revert Group (if configured for
one). This operation cannot be disabled. If Scan is
enabled the radio will also listen for activity on
enabled Zone Scan List members.
Your scan list determines which groups can be
scanned. The list is created when your radio is
programmed. If your radio has been programmed to
allow you to edit the scan list, you can,
Enable/disable scan for individual groups on the
list.
Add and Remove the scan members from the Add
Member menu. Refer to Add or Delete a Group via
the Add Members Menu on page 205.
Note: A Scan List member must be a regular Group
Contact (i.e. not Multigroup or Site All Call/Network
Wide All Call) that is currently assigned to a Channel
Selector position in a Connect Plus Zone with the
same Network ID as the currently selected Zone.
The Talkgroup alias must not match any Talkgroup
that has been included in the current Zone's Scan
List.
1
to access the menu.
Advanced Features in Connect Plus Mode
204
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com