• Enter your current four-digit password with the
radio’s keypad. The second line of the display
shows . Press to proceed.
• Enter your current four-digit password. Press
or to edit each digit’s numeric value.
Each digit changes to . Press to move to
next digit. Press to confirm your selection.
You hear a positive indicator tone for every digit
entered. Press to remove the last on the
display. You hear a negative indicator tone, if you
press when the second line of the display is
empty, or if you press more than four digits.
If the password is correct, your radio proceeds to
power up. See Powering Up the Radio on page
If the password is incorrect, the display shows
Wrong Password. Repeat Steps 1 and 2.
After the third incorrect password, the display
shows Wrong Password and then, shows Radio
Locked. A tone sounds and the LED double blinks
Your radio enters into locked state for 15 minutes,
and responds to inputs from On/Off/Volume
Control Knob and programmed Backlight button
Note: The radio is unable to receive any call,
including emergency calls, in locked state.
Unlocking the Radio from Locked State
1If your radio was powered down after being in the
locked state, power up the radio.
A tone sounds and the LED double blinks yellow.
The display shows Radio Locked.
2Wait for 15 minutes.
Your radio restarts the 15 minutes timer for locked
state when you power up.
3Repeat Steps 1 and 2 in Accessing the Radio from
Password on page 128.
Advanced Features in Non-Connect Plus Mode