Loading...
32
English
SCAN
DELETING A NUISANCE CHANNEL
Note: Your dealer must preprogram a button
to Nuisance Delete (see page 14) to
access this feature.
If a channel continually generates unwanted
calls or noise (a “nuisance” channel), you can
temporarily remove it from the scan list:
Restoring a Channel to the Scan List
1While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance
Channel Delete button until you hear a tone.
2Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the
channel that has been prepro-
grammed as your designated scan
channel, a priority channel, or the
last remaining channel in the scan
list.
1Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
1Press the preprogrammed Scan button to stop
the scan.
2Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
1Select a different channel. Once you return to
the original channel, the deleted nuisance
channels are restored to the scan list.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com