Loading...
31
English
SCAN
SCAN
Your radio is equipped with the Scan feature,
which allows you to monitor multiple channels
for voice activity. The radio will stop on a
channel when it detects activity on it.
Your radio automatically switches to a channel
within the scan list when it detects activity.
The LED indicator blinks green during a scan
operation and stops blinking when the radio
switches to a channel.
There are two types of Scan available in your
radio:
•System Scan
Auto Scan
TALKBACK
The Talkback feature allows you to respond to
a transmission while scanning. If a
transmission is detected on a channel while
scanning, the radio will stop on that channel for
a default period of time after activity has
ceased. This is referred to as “hangtime”.
During this hangtime you may respond by
pressing the PTT button.
Note: The LED scan indicator stops blinking
while the radio is in hangtime. If the
PTT button is not pressed during the
preprogrammed hangtime, the radio
returns to scanning channels.
STARTING SYSTEM SCAN
Press the preprogrammed Scan button (see
page 14).
STOPPING SYSTEM SCAN
Press the preprogrammed Scan button.
STARTING AUTO SCAN
Auto Scan automatically starts scanning once
a channel with Auto Scan enabled is selected.
Select the channel that your dealer has
preprogrammed for Auto Scan.
STOPPING AUTO SCAN
Select a channel that has not been
preprogrammed for Auto Scan.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com