Loading...
24
English
GETTING STARTED
RECEIVING
MONITORING
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.
TRANSMITTING
1Turn your radio on.
2Adjust the radio’s volume (see page 23).
3Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
1Press and hold the preprogrammed
Monitor button to access channel traffic.
2Once channel traffice has cleared, proceed
with your call by pressing the PTT button.
3A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.
1Turn your radio on.
2Use the Channel Selector knob to select the
desired channel.
3Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4Release the PTT to listen.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com