Loading...
Advanced Features
English
43
Testing the Man Down Feature
Note: Enable the Emergency feature with Silent Alarm
disabled, but not in Surveillance Mode before running
this test on the radio.
Procedure:
When Man Down is enabled on the radio:
1Turn the radio on and place in the vertical position, for at
least 5 seconds.
2Lay the radio down in the horizontal position.
3Wait for alert tone.
4The radio alerts with audible tone and displays MAN-DOWN.
OR
If no tone is heard, make sure that the Man Down feature is
enabled on your radio. If Man Down feature was not
enabled, please enable it and go through steps 1,2 and 3
again.
OR
If the Man Down feature is enabled and no tone is heard,
send the radio to a qualified technician.
Handling Man Down Functional Error Messages
Procedure:
1If your radio display shows one of the following error
messages: HW BOARD ABSENT, MAN-DOWN HW ERROR or
HW BOARD MISMATCH. Send the radio to the qualified
technician to fix this error.

Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com