If long press the Emergency button is
assigned to turn on the Emergency mode,
then short press the Emergency button is
assigned to exit the Emergency mode.
Your radio supports three Emergency Alarms:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
In addition, each alarm has the following types:
Regular Radio transmits an alarm signal and
shows audio and/or visual indicators.
Silent Radio transmits an alarm signal without
any audio or visual indicators. Radio
receives calls without any sound
through the speaker, until the
programmed hot mic transmission
period is over and/or you press the PTT
Radio transmits an alarm signal without
any audio or visual indicators, but allow
incoming calls to sound through the
Only one of the Emergency Alarms above can
be assigned to the programmed Emergency
button or the Emergency footswitch.
Sending Emergency Alarms
This feature allows you to send an Emergency Alarm,
a non-voice signal, which triggers an alert indication
on a group of radios. Follow the procedure to send
Emergency Alarms on your radio.
Your radio does not display any audio or visual
indicators during Emergency mode when it is set to
1Press the programmed Emergency On button.
You see one of these results:
•The display shows Tx Alarms and the
•The display shows Tx Telegram and the
The green LED lights up. The Emergency icon
If programmed, the Emergency Search
tone sounds. This tone is muted when the
Capacity Max Operations