Loading...
6Press the PTT button to talk and release it to
listen. The RSSI icon disappears during
transmission.
7To enter extra digits, if requested by the Phone
Call, do one of the following.
Press any keypad key to begin the input of the
extra digits. The first line of the display shows
Extra Digits:. The second line of the display
shows a blinking cursor. Enter the extra digits
and press the button to proceed. The
DTMF tone sounds and the radio returns to the
previous screen.
Press One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator
tone sounds.
8Press to end the call. If deaccess code was
not preconfigured in the Contacts list, the first line
of the display shows De-Access Code:. The
second line of the display shows a blinking cursor.
Enter the deaccess code and press to
proceed. The radio returns to the previous screen.
The DTMF tone sounds and the display shows
Ending Phone Call. If successful, a tone sounds
and the display shows Phone Call Ended. Your
radio returns to the Phone Call screen. If
unsuccessful, your radio returns to the Phone Call
screen. When you press the PTT button while in
the Phone Contacts screen, as tone sounds and
the display shows Press OK to Place Phone
Call. When the telephone user ends the call, a
tone sounds and the display shows Phone Call
Ended. If the call ends while you are entering the
extra digits requested by the Phone Call, your
radio returns to the screen you were on prior to
initiating the call.
Note:
The call initiator can press to end the All
Call.
Receiving All Calls
When you receive an All Call:
A tone sounds.
The green LED blinks.
The display shows the Group Call icon at the top
right corner.
Capacity Max Operations
55
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com