Loading...
The display continues to show the Phone Call
icon at the top right corner.
If the call is unsuccessful:
A tone sounds.
The display shows Phone Call Failed and
then, Access Code:.
Your radio returns to the screen you were on
before initiating the call if the access code has
been preconfigured in the Contacts list.
8Press to end the call.
9Do one of the following:
If the deaccess code was not preconfigured,
enter the deaccess code when the display
shows De-Access Code:, and press to
proceed.
The radio returns to the previous screen.
Press the programmed One Touch Access
button.
If the entry for the One Touch Access button
is empty, a negative indicator tone sounds.
The DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
A tone sounds.
The display shows Call Ended.
If the call fails to end, the radio returns to the
Phone Call screen. Repeat Step 11 and Step 12,
or wait for the telephone user to end the call.
Note:
When you press PTT button while in the
Phone Contacts screen, a tone sounds and
the display shows Press OK to Place
Phone Call.
When the telephone user ends the call, a
tone sounds and the display shows Call
Ended.
If the call ends while you are entering the
extra digits requested by the Phone Call,
your radio returns to the screen you were
on before initiating the call.
During the channel access, press to
dismiss the call attempt and a tone sounds.
Other Systems
285
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com