Loading...
The display shows Phone Call Failed and
then, Access Code:.
Your radio returns to the screen you were on
prior to initiating the call if the access code has
been preconfigured in the Contacts list.
6Press the PTT button to respond to the call.
The RSSI icon disappears.
7Release the PTT button to listen.
8Enter extra digits with the keypad if requested by
the call, and press to proceed.
If the call ends while you are entering the extra
digits requested by the call, your radio returns to
the screen you were on prior to initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
9Press to end the call.
10 If the deaccess code was not preconfigured, enter
the deaccess code when the display shows De-
Access Code:, and press to proceed.
The radio returns to the previous screen. The
DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
A tone sounds.
The display shows Call Ended.
If the call fails to end, the radio returns to the
Phone Call screen. Repeat Step 9 and Step 10, or
wait for the telephone user to end the call. When
you press the PTT button while in the Phone
Contacts screen, as tone sounds and the display
shows Press OK to Place Phone Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call
Ended.
If the call ends while you are entering the extra
digits requested by the Phone Call, your radio
returns to the screen you were on prior to initiating
the call.
Note:
During the channel access, press to
dismiss the call attempt and a tone sounds.
Other Systems
283
English
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com