should occur, it will be necessary to delete a group
from the scan list prior to adding a new one.
10 When finished, press as many times as
necessary to return to the desired menu.
Understanding Scan Operation
If the Radio joins a call for a Zone Scan List
member from a different Zone and Call Hang
Timer expires before you are able to respond,
in order to respond, you must navigate to the
Zone and Channel of the Scan List Member
and start a new call.
There are some circumstances in which you can miss
calls for groups that are in your scan list. When you
miss a call for one of the following reasons, this does
not indicate a problem with your radio. This is a
normal scan operation for Connect Plus.
Scan feature is not turned on (check for the scan
icon on the display).
Scan list member has been disabled via the menu
(see Editing the Scan List on page 181).
You are participating in a call already.
No member of the scanned group is registered at
your site (Multisite systems only).
Scan Talkback
If your radio scans into a call from the selectable
group scan list, and if the PTT button is pressed
during the scanned call, the operation of the radio
depends on whether Scan Talkback was enabled or
disabled during radio programming. For more
information on how your radio is programmed,
contact your radio dealer (or your radio system
The radio leaves the scanned call and
attempts to transmit on the contact for
the currently selected channel
position. After the Call Hang Time on
the currently selected contact expires,
the radio returns to the home channel
and starts the Scan Hang Time Timer.
The radio resumes group scan after its
Scan Hang Time Timer expires.
If the PTT button is pressed during the
Group Hang Time of the scanned call,
Advanced Features in Connect Plus Mode
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com