The display shows the Target Alias, indicating the
request is in progress. The LED lights up solid
2Wait for acknowledgement.
If the target radio is active in the system, a tone
sounds and the display briefly shows Target
If the target radio is not active in the system, a
tone sounds and the display briefly shows Target
Radio Not Available.
Radio returns to the subscriber alias or ID screen
when initiated via Menu.
Radio returns to the Home Screen if initiated via
the programmable button.
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or IDs
only). The green LED will blink once on the target
subscriber. You can use this feature to monitor,
remotely, any audible activity surrounding the target
Your radio must be programmed to allow you to use
Initiating Remote Monitor
Remote Monitor automatically stops after a
programmed duration or when there is any
attempt to initiate transmission, change
channels or power down the radio.
1Access the Remote Monitor feature.
1Press the programmed Remote
2 or to the required sub-
scriber alias or ID and press
Menu 1 to access the menu.
2 or to Contacts and
press to select.
Advanced Features in Connect Plus Mode