Basic Operations
This chapter explains the operations to get you
started on using the radio.
Powering Up the Radio
Follow the procedure to power up your radio.
Press the On/Off button.
A tone sounds.
The green LED lights up.
The display shows MOTOTRBO (TM), followed by a
welcome message or image.
The Home screen lights up.
There is no tone upon powering up if the
Tones/Alerts function is disabled. See Turning
Radio Tones/Alerts On or Off on page 131 for
more information.
Check your battery if your radio does not power up.
Make sure that it is charged and properly attached.
Contact your dealer if your radio still does not power
Turning Off the Radio
Follow the procedure to turn off your radio.
Press and hold the On/Off button.
The radio may take up to 7 seconds to completely
turn off.
The display shows Powering Down.
Adjusting the Volume
Follow the procedure to change the volume level of
your radio.
Do one of the following:
Turn the On/Off/Volume Control Knob
clockwise to increase the volume.
Turn the On/Off/Volume Control Knob
counterclockwise to decrease the volume.
Your radio can be programmed to have a
minimum volume offset where the volume
level cannot be lowered past the
programmed minimum volume. Check with
Basic Operations
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com