1 - 4 DS9208 Product Reference Guide
Configuring the Digital Scanner
To configure the digital scanner use the bar codes included in this manual, or use the 123Scan2 configuration
program. See Chapter 4, User Preferences & Miscellaneous Digital Scanner Options, Chapter 5, Imaging
Preferences, and Chapter 10, Symbologies for information about programming the digital scanner using bar code
menus. See Chapter 11, 123Scan2 for information on using this configuration program. Also see each host-specific
chapter to set up connection to a specific host type.
Mounting the Digital Scanner
Wall Mount Bracket
An optional wall mount bracket is available for mounting the scanner to a wall or other vertical surface. To mount
the DS9208:
1. Place the bracket in its desired location on the wall, and insert two #8 screws through each screw hole in the
Figure 1-3
Installing the Wall Mount Bracket
2. Tighten the screws to secure the bracket to the wall.
NOTE Select a screw type and length appropriate for the wall material.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com