Loading...
Important • To change any of these settings, you need to enter the printer password. The
default password is 1234.
37
Getting Started
Assigning an IP Address
11/12/2009 10/100 Internal Print Server User Guide 14197L-005
5. You can edit any of the following network settings in order to communicate with any
10/100 Internal PS in your network environment. The settings shown below will
sequentially appear after the PRI MARY NETWORK parameter on the control panel.
ip protocol (GLEANING ONLY, RARP, BOOTP, DHCP, DHCP and BOOTP, ALL,
PERMANENT): The printer menu item I P PROTOCOL must be set to
PERMANENT if attempting to assign the IP address from the control panel.
ip address (if initial default setting is 0.0.0.0, after 2 minutes this defaults to
192.168.254.254)
subnet mask (default setting 255.255.255.0)
default gateway (default setting of 000.000.000.000)
6. Which model printer do you have?
If you have a(n)… Then…
ZM400 or ZM600 a. Press Select.
b. Press Setup/Exit twice to save your changes and exit the
Setup Mode.
c. The control panel will read PRI NTER READY.
Xi4 a. Press Setup/Exit to exit the Setup Mode.
b. Press Next/Save to permanently save your changes.
c. The control panel will read PRI NTER READY.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com