Loading...
Getting Started
Assigning an IP Address
36
14197L-005 10/100 Internal Print Server User Guide 11/12/2009
12. From the Print Server Configuration dialog > TCP/IP tab, in the Default Gateway
text-box, type in your default gateway.
13. Confirm it is accurate, and click OK.
In a Non-Windows Environment
If your environment is not Windows-based, this section is for you. However, this method can
be used in a Windows environment, too.
Assigning an IP address from the printer LCD
These steps can be used to assign an IP address using the control panel (LCD).
To assign an IP address from the printer LCD, complete these steps:
1. Connect the AC power cord and data cables.
2. Turn on (I) the printer.
3. Wait until the printer completes the POST and the LCD says PRI NTER READY.
4. Which model printer do you have?
Note • This method is not available for the G-Series, ZP Series, 2824 Plus, and HC100
printers because they do not have a control panel (or printer LCD).
If you have a(n)… Then…
ZM400 or ZM600 a. When the POST cycle is complete, press Setup/Exit to
enter the Setup Mode.
b. Scroll through the parameters by pressing Plus (+) until
you reach ACTI VE PRI NTSRVR.
c. Verify that the active print server is I NTERNAL
WI RED.
d. Scroll through the parameters by pressing Plus (+) until
you reach PRI MARY NETWORK.
e. Continue to step 5.
Xi4 a. When the POST cycle is complete, press Setup/Exit to
enter the Setup Mode.
b. Scroll through the parameters by pressing Next/Save
() until you reach ACTI VE PRI NTSRVR.
c. Verify that the active print server is I NTERNAL
WI RED.
d. Scroll through the parameters by pressing Next/Save
() until you reach PRI MARY NETWORK.
e. Continue to step 5.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com