Loading...
Getting Started
Defaulting the 10/100 Internal PS
30
14197L-005 10/100 Internal Print Server User Guide 11/12/2009
Defaulting the 10/100 PS on the HC100 Printers
To default the 10/100 Internal PS to factory settings, complete these steps:
1. Press and hold Feed for two seconds.
2. Wait for the three blink sequence of the Error/Status LED.
3. Release Feed.
Defaulting the 10/100 PS on the Xi4 Printers
To default the 10/100 Internal PS to factory settings, complete these steps:
1. From the control panel, press Setup/Exit two times.
2. Press Plus (+) five times.
The control panel will read DEFAULT NET.
3. Press Next/Save to save the change.
The control panel will read PRI NTER READY.
Note • Be sure to count the number of LED blinks. The three blink sequence defaults only
the print server parameters while the four blink sequence defaults all of the printer
parameters.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com