Loading...
27
Getting Started
Setting the Primary Network Print Server
11/12/2009 10/100 Internal Print Server User Guide 14197L-005
Setting the Primary Network Print Server
Wired
Wireless
*NOTE: A Wireless Option board must have an active radio that can properly associate to an
access point.
The ZM400, ZM600, and Xi4 printers support the simultaneous installation of an internal
wired, external wired, and a wireless print server. Even though all three print servers may be
installed, only one is connected to the network and is the active print server. Table 4 outlines
priorities and identifies which device becomes the active print server when multiple print
servers are installed.
Table 4 • Primary Print Server
The primary network setting can be configured using any of the following methods:
1. Printer’s control panel:
•ZM400:
PRI MARY NETWORK
Xi4: PRI MARY NETWORK
G-Series, ZP Series, HC100, 2824 Plus: Not available
2. ZPL command: ^NC
3. Set-Get-Do command: ip.primary_network
4. Printer’s web page: Network Configuration > Primary/Secondary Settings
If the
Primary
Network
is set
to:
Installed and Connected to a Live
Ethernet Network Then, the
Active Print
Server will be:
Internal External Wireless*
XX X Internal
XXExternal
XWireless
XX X Wireless
XX Internal
X External
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com