Getting Started 1 - 3
Setting Up the Digital Scanner
Installing the Interface Cable
1. Insert the interface cable modular connector into the interface cable port on the rear of the digital scanner until
an audible click sounds. Low/medium/high beeps sound, indicating the scanner is operational.
Figure 1-2
Installing the Cable
2. Gently tug the cable to ensure the connector is secure.
3. Connect the other end of the interface cable to the host (see the specific host chapter for information on host
Interface cable
modular connector
To ho s t
Cable interface
Interface cable modular
connector clip
IMPORTANT Insert the cable into the cable interface port until an audible click sounds.
When connecting the DS4208 using a USB cable, a shielded connector cable is required (e.g., p/n
CBA-U21-S07ZAR). If upgrading an LS2208 or LS4208 to a DS4208, use the shielded connector
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com