RS-232 Interface 6 - 3
RS-232 Parameter Defaults
Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the RS-232 Host Parameters section beginning on page 6-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 6-1
RS-232 Host Default Table
Parameter Default Page
RS-232 Host Parameters
RS-232 Host Types Standard 6-6
Baud Rate 9600 6-8
Parity Type None 6-9
Data Bits 8-Bit 6-10
Stop Bits 1 Stop Bit 6-10
Check Receive Errors Enable 6-11
Hardware Handshaking None 6-11
Software Handshaking None 6-13
Host Serial Response Time-out 2 Sec 6-15
RTS Line State Low RTS 6-16
Beep on <BEL> Disable 6-16
Intercharacter Delay 0 msec 6-17
Nixdorf Beep/LED Options Normal Operation 6-18
Ignore Unknown Characters Send Bar Code 6-18
Note: The DS4208 supports one stop bit only.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com