Loading...
Operations
Control Panel LCD Display
70
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
CHANGE GATEWAY Change the Gateway
This parameter can be modified only when PERMANENT is selected for
OBTAI N I P ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
CHANGE I P PROTOCOL Change the IP Protocol
Determines the method(s) by which the print server (wired or wireless)
receives the IP address from the server.
This parameter can be modified only when AUTO SELECT is selected
for OBTAI N I P ADDRESS.
Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP,
DHCP AND BOOT
Default Value: ALL
To modify this parameter:
Press the up or down arrow to scroll through the selections.
Table 13 • Print Server LCD Displays (Page 2 of 2)
Parameter Explanation
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com