Loading...
69
Operations
Control Panel LCD Display
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
ZebraNet®Wired and Wireless Print Server LCD Displays
The menu options shown in Table 13 display only if you have the ZebraNet PrintServer II, or
10/100 PrintServer, or Wireless Print Server installed and are operating in ZPL or EPL mode.
These parameters are considered part of Level 3.
Table 13 • Print Server LCD Displays (Page 1 of 2)
Parameter Explanation
OBTAI N I P ADDRESS Obtain an IP Address
Selects the method by which an IP address will be assigned to the printer.
Selections: AUTO SELECT (dynamic), PERMANENT (user-specified)
Default Value: AUTO SELECT
To modify this parameter:
Press the up or down arrow to scroll through the selections.
CHANGE I P ADDRESS Change the Printer’s IP Address
This parameter can be modified only when PERMANENT is selected for
OBTAI N I P ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
CHANGE SUBNET Change the Subnet
This parameter can be modified only when PERMANENT is selected for
OBTAI N I P ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address. If an IP
address contains more digits than can be displayed at one time, use
the left or right arrows to scroll through the digits.
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com