Loading...
65
Operations
Control Panel LCD Display
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
RI BBON Set Ribbon Use
Note • This parameter appears only for printers that have the
Thermal Transfer option installed.
Specifies the printing method: thermal transfer (using ribbon) or
direct thermal (no ribbon).
Selections:
YES (thermal transfer mode, with ribbon)
NO (direct thermal mode, no ribbon)
Default Value: YES
To modify this parameter:
Press the up or down arrow to scroll through the selections.
ZPL OVERRI DE
(ZPL mode only)
Override Certain ZPL Commands
Prevents the printer from accepting the following ZPL commands:
^MM (media mode)
^MT (media type direct thermal or thermal transfer)
^MN (media non-continuous or continuous)
Selections:
NO—allows the printer to accept the listed ZPL commands.
YES—tells the printer to ignore the listed ZPL commands.
Default Value: NO
To modify this parameter:
Press the up or down arrow to scroll through the selections.
EPL OVERRI DE
(EPL mode only)
Override Certain EPL Commands
Prevents the printer from accepting certain EPL commands.
Selections:
DISABLED—allows the printer to accept the listed EPL commands.
ENABLED—tells the printer to ignore the listed EPL commands.
Default Value: DISABLED
To modify this parameter:
Press the up or down arrow to scroll through the selections.
Table 12 • Printer Parameters, Password Level 3 (Page 7 of 10)
Parameter Explanation
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com