Loading...
61
Operations
Control Panel LCD Display
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
DATA BI TS Set Data Bits
The data bits of the printer must match the data bits of the host computer
for accurate communications to take place. Set the data bits to match the
setting being used by the host computer.
Note • Code Page 850 requires the data bits to be set to 8 bits.
Selections: 7BITS, 8BITS
Default Value: 8BITS
To modify this parameter:
Press the up or down arrow to scroll through the selections.
STATUS RESPONSE
(APL-I mode only)
Send APL-I Status Response
Determines if a response is sent after inquiry commands. The format is set
with the RESPONSE FORMAT parameter.
Selections: ON, OFF
Default Value: ON
To modify this parameter:
Press the up or down arrow to scroll through the selections.
RESPONSE FORMAT
(APL-I mode only)
Select APL-I Response Format
If STATUS RESPONSE is set to ON, this parameter determines the
format of the response.
Selections: ASCII, BINARY
Default Value: ASCII
To modify this parameter:
Press the up or down arrow to scroll through the selections.
PARI TY Set Parity
The parity of the printer must match the parity of the host computer for
accurate communications to take place. Select the parity that matches the
one being used by the host computer.
Selections: NONE, ODD, EVEN
Default Value: NONE
To modify this parameter:
Press the up or down arrow to scroll through the selections.
Table 12 • Printer Parameters, Password Level 3 (Page 3 of 10)
Parameter Explanation
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com