Control Panel LCD Display
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
(APL-I mode only)
Set Printer Resolution for APL-I
Sets the dot size for backward compatibility with some older APL-I
Selections: 5 MIL, 10 MIL, 15 MIL
Default Value: 5 MIL
To modify this parameter:
Press the up or down arrow to scroll through the selections.
LENGTH Set Maximum Label Length
Maximum label length is used in conjunction with the calibration
procedure. The value of this setting is the maximum label length that is
used during the media portion of the calibration process. Only a few labels
are required to set media sensors. Always set the value that is at least 1 in.
(25.4 mm) longer than the longest label to be used on the printer.
Selections: AUTO, < 1 I NCH (25.4 mm) to < 39 I NCH (991 mm)
Default Value: AUTO
To modify this parameter:
To increase the value, press the up arrow.
To decrease the value, press the down arrow.
Table 11 • Printer Parameters, Password Levels 1 and 2 (Page 5 of 5)
Parameter Explanation
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com