Loading...
Operations
Control Panel LCD Display
56
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
MEDI A TYPE Set Media Type
Tells the printer which type of media you are using.
Selections:
GAP/NOTCH—Use for non-continuous web media, non-continuous
fanfold media, and tag stock.
CONTINUOUS—Use for media that does not have divisions
between labels.
MARK—Use for non-continuous black mark media.
Default Value: GAP/NOTCH
To modify this parameter:
Press the up or down arrow to scroll through the selections.
SENSOR SELECT Select the Media Sensor
Use the setting that gives the best results. You can use the reflective sensor
for most media.
REFLECTIVE—Use with black mark media and most other media
types.
TRANSMISSIVE—Use with any media (other than black mark
media) that does not work well with the reflective sensor.
To use the transmissive sensor with media that has holes or notches,
verify that the holes or notches pass through the sensor so that the
sensor can detect them. If the holes or notches do not pass through
the sensor, use the reflective sensor.
Default Value: REFLECTIVE
To modify this parameter:
Press the up or down arrow to scroll through the selections.
REMOVAL Select the Label Removal Method
The label removal must correspond to the print mode. Be sure to select a
label removal mode that your hardware configuration supports because
some of the selections displayed are for optional printer features.
Selections: TEAR, PEEL, CUTTER, REWIND, DELAYED CUT
Default Value: TEAR
To modify this parameter:
Press the up or down arrow to scroll through the selections.
Table 11 • Printer Parameters, Password Levels 1 and 2 (Page 3 of 5)
Parameter Explanation
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com