Loading...
Operations
Adjust Printhead Pressure
44
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Adjust Printhead Pressure
You may need to adjust printhead pressure if printing is too light on one side or if you use thick
media.
See Figure 22. The pressure adjustment dials have four possible settings designated by blocks
of increasing size embossed on the print mechanism. The smallest block (fully
counterclockwise) is considered position 1, and the largest block (fully clockwise) is
considered position 4.
Figure 22 • Printhead Pressure Adjustment Dials
To set printhead pressure, complete these steps:
1. Use Table 7 to select the initial dial settings for your media.
1Outside dial
2Inside dial
12
Table 7 • Printhead Pressure
Media Width Inside Dial Outside Dial
1 in. (25.4 mm) 31
2 in. (51 mm) 41
3 in. (76 mm) 32
3.5 in. and up (89 mm and up) 33
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com