Handling the Printer
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Handling the Printer
This section describes how to handle your printer.
Unpack and Inspect the Printer
When you receive the printer, immediately unpack it and inspect for shipping damage.
Save all packing materials.
Check all exterior surfaces for damage.
Raise the media door, and inspect the media compartment for damage to components.
If you discover shipping damage upon inspection:
Immediately notify the shipping company and file a damage report.
Keep all packaging material for shipping company inspection.
• Notify.
Store the Printer
If you are not placing the printer into immediate operation, repackage it using the original
packing materials. You may store the printer under the following conditions:
Temperature: –40°F to 140°F (–40°C to 60°C)
Relative humidity: 5% to 85%, non-condensing
Ship the Printer
If you must ship the printer:
Remove any media or ribbon from the printer to avoid damaging the printer.
Carefully pack the printer into the original container or a suitable alternate container to
avoid damage during transit. A shipping container can be purchased from Zebra if the
original packaging has been lost or destroyed.
Recycle the Printer
This printer is recyclable. If you must dispose of the printer, do not do so in unsorted
municipal waste. Please recycle according to your local standards. For more
information, see http://www.zebra.com/recycle.
Important • Zebra Technologies Corporation is not responsible for any damage incurred
during the shipment of the equipment and will not repair this damage under warranty.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com