Loading...
Preventive and Corrective Maintenance
10/100 Internal ZebraNet PrintServer, Wireless Print Server, Parallel Port, No Comm
304
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
2. See Figure 165 on page 302. For the wireless print server board; install the board using
the two standoffs and mounting screws. Install the 40 pin cable that will go to the main
logic board.
3. See Figure 166 on page 303. For the no communication option. Both washers must be
installed.
4. See Figure 167. Using the two screws supplied to install the bracket on the back of the
printer.
Figure 167 • Install the Bracket for the No Communications Option
1Mounting screws (2)
2Bracket
1
1
2
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com