Preventive and Corrective Maintenance
10/100 Internal ZebraNet PrintServer, Wireless Print Server, Parallel Port, No Comm
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
Install the Parallel Port Board, 10/100 Internal ZebraNet
PrintServer, No Communication, or the Wireless Print
Are you installing the 10/100 PrintServer for the first time?
Figure 166 • Remove the Short Standoffs
1. See Figure 164 on page 301. For the 10/100 Internal ZebraNet PrintServer board and
the parallel port; install the board using the standoff. Install the 40 pin cable that will go
to the main logic board.
No Continue to step 1.
Yes a. See Figure 166. Remove the two short standoffs shown.
b. Remove the two washers, they are used as spacers when there is no option
c. Continue to step 1.
1Washer (must be used when there is no wireless option installed)
4Washer (must be used when there is no option board installed)