Preventive and Corrective Maintenance
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
Install the New Control Panel
1. Tip the top of the control panel away from the main frame and insert the two tabs in the
mounting holes in the base.
Figure 150 • Install the Control Panel in the Base
2. See Figure 146 on page 275. Guide the control panel cable through the access hole in the
front of the main frame. Connect it to J2 on the MLB.
3. Do you have a take-label sensor?
5Access holes (2)
No Continue to step 4.
Yes a. Guide the take-label sensor cable around and through the lower access hole
in the main frame.
b. Route the take-label sensor cable through the conduit and then connect it to
J19 on the MLB. Continue to step 4.