Preventive and Corrective Maintenance
Outer Media Guide
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Remove the Outer Media Guide
1. Turn Off (O) the printer and disconnect the AC power cord.
2. Open the media side cover and remove all media and ribbon from the printer.
See Figure 132 and Figure 133. Remove the thumb nut or screw, washer, and spring.
4. Lift the outer media guide out of the platen housing.
Figure 132 • Remove the Old Outer Media Guide
Caution • Wear protective eye wear when installing or removing E-rings, C-clips, snap
rings, springs, and mounting buttons. These are under tension and could fly off.
1Outer media guide
2Mounting nut or screw