Preventive and Corrective Maintenance
Ribbon Supply Spindle
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
15. Set the tension on the ribbon supply spindle to either the high or low setting depending on
the width of the ribbon.
Install the Electronics Cover
1. See RRP No. 2 on page 124 and install the electronics cover.
2. Reinstall the media and ribbon.
3. Reconnect AC power cord and data cables.
4. Turn On (l) the printer.
Note • If your ribbon is wide, use the high tension setting. If you experience ribbon
slippage, use the low tension setting.