Preventive and Corrective Maintenance
Ribbon Take-Up Spindle Clutch
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
6. See Figure 97. Loosen the two set screws on the ribbon take-up spindle collar and slide the
collar off of the shaft.
7. Remove the plastic thrust washer, bearing, and clutch gear assembly from the shaft of the
ribbon take-up spindle assembly.
Figure 97 • Ribbon Take-Up Spindle Assembly/Disassembly
1Compound gear mounting screw
4Clearance—0.020 in. (0.508 mm)
6Clutch gear w/spring