Preventive and Corrective Maintenance
Reflective Media Sensor
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
3. See Figure 87. Cut the cable tie securing the media sensor wires inside the wire way of the
platen roller housing.
4. Gently remove the latch cover.
Figure 87 • Media Sensor Removal
5. Slide the media sensor carrier all the way out until it stops, and then gently press down on
the carrier and slide the carrier until it drops out of the platen housing.
1Platen roller housing
4Media sensor holder tabs (2)
5Media sensor assembly