Preventive and Corrective Maintenance
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
Remove the Old Printhead Cables
See Figure 63. Remove the thumbscrew.
2. Remove the printhead fork assembly from the print mechanism.
Figure 63 • Remove the Printhead Fork Assembly
3. Disconnect the printhead power and data cables.
4. See Figure 64. Lay the print mechanism on its top and slide the cables toward the hinge
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
3Printhead power cable
4Printhead data cable
5Printhead fork assembly