Preventive and Corrective Maintenance
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
This procedure is for installing the printhead power and data cables in the S4M printer. Read
these instructions thoroughly before performing this procedure.
Prepare for Installation
The following manuals and CDs may be helpful references while performing this procedure.
• S4M User Guide
• S4M User Guide CD
• S4M Maintenance Manual CD
Caution • Turn Off (O) the printer and disconnect it from the power source before
performing the following procedure.
Tools • You need these tools to complete this procedure:
Phillips Screwdriver Set
Flat-Blade Screwdriver Set
Metric Hex Key (Allen wrench) Set
Anti-Static Wriststrap and Mat
Metric Nutdriver Set
Metric and inch Feeler Gauges, must
include: 0.060 in. (1.5mm)
4 inch crescent wrench
47362 Zebra Preventative Maintenance
77919 Pin Gauge (qty = 2)
Q10011 Screw (Cam and Pin Gauge)