Preventive and Corrective Maintenance
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
Adjust the Print Mechanism
1. See Figure 56. Remove the strike plate cap by gently prying up one snap tab with a small
flat blade screwdriver. Loosen the strike plate mounting screws 1/2 turn.
2. See Figure 51 on page 142. Set both printhead pressure dials to 3.
Figure 56 • Adjust the Print Mechanism
1Strike plate cap
4Strike plate mounting screws (2)
5Print mechanism gap pin gauges (2)