Preventive and Corrective Maintenance
Printhead Upgrade Option
13291L-001 Rev. A S4M Maintenance Manual 10/27/05
Printhead Upgrade Option
This procedure is for converting the drive system and printhead from 203 to 300 dpi or 300 to
203 dpi on the S4M printer. Read these instructions thoroughly before attempting to
changeover the printhead and drive system.
Prepare for Installation
Reference Materials
The following manuals and CDs may be helpful references while performing this procedure.
S4M User Guide
S4M User Guide CD
S4M Maintenance Manual CD
Tools Required
Caution • Turn Off (O) the printer and disconnect it from the power source before
performing the following procedure.
Tools • You need these tools to complete this procedure:
Phillips Screwdriver Set
Metric Nutdriver Set
47362* Zebra Preventive Maintenance
Antistatic Wriststrap and Mat
Metric and inch Feeler Gauges, must
include: 0.060 in. (1.5mm)
Metric Hex Key (Allen wrench) Set
*. A solution of 90% isopropyl alcohol and 10% deionized water and clean swabs may be used in place of the Preventative
Maintenance Kit.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com