Preventive and Corrective Maintenance
10/27/05 S4M Maintenance Manual 13291L-001 Rev. A
Remove the Printhead
Connect yourself to an antistatic device.
2. Turn Off (O) the printer and disconnect the AC power cord and data cables.
3. Open the media door and remove media and ribbon.
4. See Figure 37. Note the current printhead pressure dial settings, and then rotate the two
printhead pressure dials to position #1.
Figure 37 • Printhead Pressure Knobs
5. See Figure 38. Remove the printhead thumbscrew.
Caution • Observe proper electrostatic safety precautions when handling
static-sensitive components such as circuit boards and printheads.
4Printhead pressure dials (2)
Front of Print er